DE
EN

MFT-FOX HT-2L-ADHESIVE-RIVETS-SCREWS


The system consists of profiles plus wall brackets that eliminate thermal bridging and is specifically designed for horizontal / vertical substructures in ventilated facades. Thanks to the vertical fasting of the brackets, optimal load transfer to the base material can be realized. The wall brackets are supplied with a powder-coated base plate, according with the method of installation to the base material — anchors, screws and direct fastening — with different hole geometries in the base plate.

In addition to the pre-assembled connecting screw, the bracket offers an easy and efficient method of installation. Fixed and flexible points are not required as the thermal expansion of the profile is taken up by the flexibility of the bracket. The bracket offers a quick and safe means of fastening — incorrectly installed brackets become a thing of the past. An additional washer allows fastening in accordance with Eurocode with vertical adjustment of the bracket (anchor and direct fastening).

For double-layer systems the vertical profiles (2nd layer) are supplied with elongated holes to allow the vertical profiles to be fastened to the horizontal profiles (1st layer) free of forces of constraint. Fixed points are created by placing two screws in the elongated holes while flexible points consist of one screw.

Advantages

  • Flexible design using fixed and flexible points is no longer required
  • Bracket length from 140 mm to 320 mm
  • Powder-coated base plate for resistance to contact corrosion
  • 40 mm adjustment capability of the profiles on the wall brackets
  • Pre-assembled fastening screw in A4 material
  • Brackets can be installed using a range of methods — anchors, screws or direct fastening
  • Substructures can be designed with PROFIS Facade to create technically sound, cost-efficient solutions

Hilti - MFT-FOX HT Ventilated Facade Installation Video

System downloads

System components

Brackets:

  • MFT-FOX HT M / L

Bracket fastener:

  • HUS-HR
  • HRD-H
  • HST-R
  • HSA-R
  • HIT-HY
  • S-MD

Profiles:

  • MFT-L
  • MFT-Z
  • MFT-O

To order products, visit your local Hilti page.